Liquid Rubber
What Is Liquid Rubber?
Liquid Rubber is an environmentally friendly, water and corrosion proofing product designed for a wide range of protective coating applications. A single component (no hardeners), solvent and toxin free product which can be applied indoors and outdoors without special protective equipment.
Before application Liquid Rubber has a thin, paint like consistency but dries to a seamless rubber membrane with excellent strength, elasticity and adhesion. It will form a thick coating which will not oxidise, craze, crack, loosen or scale. It withstands soil stresses and resists attack from alkalis, acids, salts and moisture. Liquid Rubber:
- Requires no pre-mixing or hardeners
- Adheres just as strongly to concrete, timber, steel and most substrates
- Is resistant to most inorganic solutions
- Is odourless
- Is UV stable
Liquid Rubber-701 Spray-Cote
Dries to a semi-soft rubber coating. Ideal for rust prevention on vehicles/structures and waterproofing in the construction industry.
- Thin paint like consistency
- Can be brush or roller applied
- Able to be applied with standard spray gun either air or electric
Liquid Rubber-711 HD Porridge
Dries to a semi-soft rubber coating. Ideal for rust prevention on vehicles/structures and waterproofing in the construction industry.
- Thick porridge like consistency
- Ideal for applying thick protective coating
- The high viscosity allows it to be used to cover small cracks
- Can be brush or roller applied
- Requires specialist, heavy duty spray equipment to apply
Liquid Rubber Applications
Liquid Rubber can be applied to:
- Motor vehicles
- Rust proofing
- Sound deadening
- Boats
- Floors
- Walls
- Non slip surfaces
- Horse floats/boat trailers/caravans
- Trailers
- Tray and frame protection
- Silos/hoppers
|
- Buildings
- Roof repairs
- Foundation sealing
- Floors
- Walls
- Stairs
- Ablution blocks
- Non slip surfaces
- Agricultural and farm machinery
- Ponds, flower beds and all water tight enclosures
|
Using Liquid Rubber
Preparation Before Use:
All surfaces to be coated should be clean, dry and free of all loose or foreign matter.
Method of Application:
-
Liquid Rubber bonds firmly to steel, aluminium, wood, plastic, concrete and most materials of construction without the use of a primer.
- Liquid Rubber can be applied by spray, brush or roller. Brushes wash out in Mineral Turpentine.
- Drying time will vary depending on temperature, humidity, application rate and surface conditions. Generally touch dry in one hour – fully cured in 24 hours.
More Information
> Find your local ERPS stockist
> Purchase ERPS kits in our online shop